Friday, February 24, 2012

Slick Strips, 3/4" Width 1/32" Thick

Slick Strips, 3/4" Width 1/32" Thick Reviews



More Picture


Do you looking for Slick Strips, 3/4" Width 1/32" ThickWoodRiver, This is best answer for you to get Lowest Prices on it then ,I hope you will be happy to buy and read our reviews and see prices comparision on Slick Strips, 3/4" Width 1/32" ThickWoodRiver Best Price!. Let’s Shopping !!!

Slick Strips, 3/4" Width 1/32" Thick Feature

  • 3/4" Width 1/32" Thick
  • 10.5' rolls
  • Easily cut to length
Slick Strips reduce friction to the point where almost everything moves like its mounted on ball bearings! This special UHMW (Ultra High Molecular Weight) adhesive-backed flexible plastic film has a low coefficient of friction and a high abrasion resistance that surpasses even Teflon. The 3/4" width is perfect for renewing the smooth run of worn wooden drawers.10.5 rolls are easily cut to length.Slick strips are 1/32" thick.


Go tO Store Now !!

More Products

More Reviews



Sunday, February 19, 2012

SawStop TSI-DLD Dado Lock Down Insert

SawStop TSI-DLD Dado Lock Down Insert Reviews



More Picture


SawStop TSI-DLD Dado Lock Down Insert Feature

  • Precision machined
  • Positioning screws ensure a solid and precise fit in the table
  • Positive locking latch allows for tool-free operation
  • Solid phenolic core
  • Low-friction, wear-resistant melamine surface
This insert can be used on all SawStop Table Saws using 8" dado blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. The positive locking latch allows for tool-free operation.


Go tO Store Now !!

More Products

More Reviews



Saturday, February 18, 2012

Grizzly H3051 Riser Block Kit for G0555

Grizzly H3051 Riser Block Kit for G0555 Reviews



More Picture


Increase your G0555 14" bandsaw's cutting capacity to 12" high with this bolt-on 6" extension block kit. Includes all necessary hardware plus extended blade guard and 3/8" x 105" x 6 TPI blade.


Go tO Store Now !!

More Products

More Reviews



Thursday, February 16, 2012

StoneTech KA12-32 Klenz All Stone Tile and Grout Cleaner, 1-Quart

StoneTech KA12-32 Klenz All Stone Tile and Grout Cleaner, 1-Quart Reviews



More Picture


StoneTech KA12-32 Klenz All Stone Tile and Grout Cleaner, 1-Quart Feature

  • Highly concentrated alkaline cleaner and degreaser for natural stone, ceramic tile and grout
  • Powers through stubborn grease and soils
  • Provides coverage for up to 4,000 square feet
  • Non-abrasive cleaner that will not etch
  • Liquid has a fresh scent, and safe for all natural stone
The StoneTech professional klenzall stone tile and grout cleaner is a highly concentrated heavy duty alkaline cleaner and degreaser for natural stone, ceramic tile and grout. This professional strength, alkaline formula liquid powers through stubborn grease and soils. The non-abrasive cleaner features a deep cleaning action that will not etch, and provides coverage for up to 4,000 square feet. The liquid has a fresh scent and is safe for all natural stone. The product is compatible with marble, granite, limestone, travertine, slate, terrazzo and sandstone, ceramic tile, porcelain tile and grout, masonry, and concrete. STONETECH Professional KlenzAll Alkaline Stone Cleaner - 1 Quart Concentrate Professional strength formula quickly wipes up stubborn grease and soils. Formulated with advanced, alkaline-based soil and grease cutting technology. Features + Benefits: Powers through stubborn grease & soils Safe on stone, will not etch Professional strength, alkaline formula Where to Use: Natural stone such as marble, granite, limestone, travertine, slate, terrazzo & sandstone. Ceramic tile, porcelain tile & grout. Masonry & concrete. Directions: Note: Directions may vary depending on size. Always test in a small inconspicuous area to determine ease of use and desired results. Make sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Spray directly on soiled area. Minimize overspray. Scrub with a clean, non-abrasive sponge or stiff nylon brush as needed. Wipe up with a clean dry towel, sponge or mop. For optimum results, rinse area well with clean water Reseal cleaned area. Size and Coverage: Quart Concentrate 500 - 4000 sq. ft. Stonetech


Go tO Store Now !!

More Products

More Reviews



Saturday, February 11, 2012

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station

Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station Reviews



More Picture


Bench Dog 10-025 Push-Loc Offset Push Stick For Table Saws, Router Tables with Docking Station Feature

  • Offset handle gets your right hand out of harm's way.
  • Ergonomic "no-slip" grip has the best feel.
  • Special handle geometry keeps Push-Loc parallel to your rep fence throughout the entire cut.
  • Rear tail hook secures Push-Loc to your work piece.
  • Rubber sole helps prevent slippage and won't mar your work piece.
Premium quality electrodes have performance characteristics that help guarantee strong quality welds. Forgiving qualities offer ease-of-use for this occasional welder. No. 44559: For use on dissimilar steels, 1/8" x 14", 6 rods per card No. 43400: All-purpose cast-iron, 1/8" x 14", 14 rods per card No. 45889: Unique electrode for brazing and arc welding, 1/8" x 14", 9 rods per card


Go tO Store Now !!

More Products

More Reviews



Thursday, February 9, 2012

Fastcap Chopsaw Saw Hood

Fastcap Chopsaw Saw Hood Reviews



More Picture


Fastcap Chopsaw Saw Hood Feature

  • Heavy-duty water-resistant nylon hood.
  • Use around around chop saws, miter saws, lathes etc.
  • Control messes, contain debris
  • Also functions as a protective cover
  • Dimensions are 42''W x 30''D x 31''H
Control messes created on the jobsite by sawdust and other debris with this heavy-duty water-resistant nylon hood. Hood creates a shell around chop saws, miter saws, lathes and wet saws to contain debris to a small area and prevent it from littering your entire work area. Also functions as a protective cover for equipment when working outdoors. Collapsible frame makes setup and take-down quick and simple. Hood dimensions are 42"W x 30"D x 31"H. Includes mounting hardware.


Go tO Store Now !!

More Products

More Reviews



Tuesday, February 7, 2012

INCRA Build-It Hold Down Clamp

INCRA Build-It Hold Down Clamp Reviews



More Picture


INCRA Build-It Hold Down Clamp Feature

  • Work with all Incra Track and Incra T-Track components and accessories
  • An ideal accessory for the Build-It system family of tools
  • Locks a workpiece into place for consistent cutting results
  • Exclusive captured pivot design provides hassle free clamping
  • Sturdy aluminum component construction
The glue that holds everything together is INCRAs innovative NEW T-Slot Panel Connector. These specially designed aluminum components serve to simultaneously interconnect the panels and provide a rock solid T-Slot for adding and holding Build-It Hold Down Clamps.


Go tO Store Now !!

More Products

More Reviews